The INTERLUBE GX lubrication system is a single line system capable of providing metered lubrication for up to 500 points with traditional flow units or the more precise Positive Displacement Units (PDU`s). GX pumps are provided either with integral controls or without controls to allow it to be fitted to a system where the customer provides external controls. There are several optional fittings for either type.
The only maintenance that is required to be carried out on the INTERLUBE GX, with or without controls, is to periodically check the lubricant level and topping up the recommended lubricant as necessary, occasionally checking the suction filter and inspecting pipework and tubing for damaged or loose connections and making good as required. At all times observe the following for fault free operation: – a) Use only INTERLUBE approved lubricants. b) Ensure stored lubricant is kept dirt free at all times and before filling ensure all areas around filling cap are wiped clean and the inlet strainer is fitted. c) After filling the reservoir ensure that the filler cap is fully secured. If the unit fails to operate correctly, try to trace the fault using the chart and change the parts as necessary