Filtakleen Oil Filtration
Ultra-fine Debris removal down to 1 micron.
Once installed, Filtakleen’s filtering efficiency removes all damaging wear particles down to 1-micron which are normally missed by the standard main 10 micron filter.
This removal of ultra fine debris at source immediately cuts the risk of malfunctioning control valves as well as dramatically reducing the sandblasting erosion of the hoses and seals by fine particles.
In addition, Filtakleen takes away the risk of silting the suction filters which can cause pump damage through cavitation.
In fact, the finer tolerances of today’s machinery makes the removal of 1-10 micron wear particles a necessity and so by addressing this need with Filtakleen you are creating major long term benefits in both component life, circuit operation and production.
100% Water Removal aids in the reduction of oil acidity.
With its ability to remove all moisture content Filtakleen reduces dramatically the normal acid build-up in the oil, so avoiding the corrosion and chemical degradation of all the seals and hoses as well as preventing unnecessary pump wear and cavitation through invert emulsions.
Any moisture, either from a leak, or internally produced will be immediately removed by the Filtakleen element. Even totally emulsified oil can be rapidly recovered.